Sunbrella 45542-0000 Blox Slate Seat Cushion

Measure the width of the cushion at the widest point as the left to right measurement when standing in front of the furniture where the cushion will be placed. We accept whole, half, and quarter-inch (.25 or .75) increments only. (Cushions more than 52" wide may show one or more visible seams in the cushion fabric when choosing a vertically directional fabric.) A zipper will be placed along the width of the cushion.

Measure the depth of the cushion at the deepest point as the front to back measurement when standing in front of the furniture where the cushion will be placed. We accept whole, half, and quarter-inch (.25 or .75) increments only.

Cushion will have a seam around the top and bottom edges and is available in a broader range of thicknesses.

CumuPlush fill is a special layered blend of dry conjugate fiber and densified polyfiber designed to not retain water and resist mildew. This filling is recommended for outdoor applications and may also be used indoors. More Info
*Thickness measurements are taken seam to seam. The loft on each side of your cushion could be up to 1" greater than your specified thickness, as the insert's thickness is slightly larger, making sure you get that taut, filled effect.

Foam fill is recommended for indoor or protected outdoor applications since water may be retained in the foam cushion for longer periods of time. A thin layer of batting is added to the top of the foam for extra comfort and to better shape the cushion. More Info

All 4 corners are squared.

No Ties

Ties on 2 Back Corners (Ties are sewn into the back seam of the cushion. Each fabric tie is 12 to 14 inches in length.)